Laser engraving machine engraving wood materials

Grays performance

Ordinary mechanical sculpture sculpture can not be the way the economys point of different thickness, which does not have the intensity of expression. Laser engraving machine is the realization of RBI, has the natural advantage of gray-scale performance. This design as far as possible in sculpture form of gray, so the advantage of reducing the coloring process on the one hand, the cost savings; the other hand, means to enrich the performance of carving and increase the level of graphics. Users to use, within the first graphics do different gray fill (text first transformed into graphics), select the black and white engraving output can try the effect of different networks, precision is generally not more than 500dpi.

Carving material

Logs (raw timber)

Wood is by far the most commonly used laser processing materials, it is easy carving and cutting. Light-colored wood like birch, cherry or maple can easily be laser vaporization, and therefore more suitable for carving. Each timber has its own characteristics making signs, and some compact some, such as hardwood, the engraving or cutting is necessary to use more laser power. We recommend that the wood carving are not familiar with before, to start with carved features.


In fact carved in the plywood and the wood carving is not much difference, but there is one thing to note, not too deep carving. After cutting the plywood edges will be as black as the wood, the key to see if the plywood is to use the kind made of wood. <

Wood carving

In general, the wood carved sculpture is usually overcast, and the general requirements for deep engraving depth. This power is generally set higher, in case of hard wood engraving after the drawing may cause the color to become darker. If you want to make the color lighter, can increase the speed of engraving, carving a few times to try more. Some wood carving will produce some soot attached to the wood surface, if the timber has been a paint brush can be used wet cloth to wipe off carefully and, if not painting could not wipe clean the surface fouling resulting product.

Timber Cutting

Laser engraving machine cutting depth of the wood is generally not deep, the maximum wood cutting depth depends on the material and laser power, such as the timber to be cut very thick, slow the cutting speed, but may cause burning of wood. Specific operations may try to use large format lenses, and repeat the cutting method used.


After the wood carving was generally feel a burning feeling, with wood to match the background color with an original artistic beauty, the depth of their color mainly depends on the speed of laser power and carving. However, some wood is usually soft texture that, no matter how you can not change its color (eg birch). On the finished coloring, use acrylic paint.

Optional laser engraving machine
Laser engraving machine security Ten NOTE